Home Glossary of terms

Office lease and purchase glossaryGlossary of terms

A plain-English guide to the 300 terms tenants and buyers meet in commercial lease and purchase documents, with tips on what to check and negotiate.

Tenant’s glossary of commercial leasing terminology

Commercial leases are long, technical and written mostly to protect the landlord. These are the terms tenants most often meet in office, retail and industrial lease documents. Many entries add a tenant tip on what to check or negotiate.

Common lease types compared

Gross (full service)Modified gross / base yearTriple net (NNN)
Who pays operating costsLandlord, built into the rentLandlord pays up to a base amount; tenant pays increasesTenant pays its share of all costs directly
Quoted rate looksHighestModerateLowest
Cost certaintyHigh in year one; increases may be passed throughModerateVaries year to year
Watch forBase year, gross-up, pass-throughsExpense stop level, capsUncapped costs, capital items, management fees

Key measurements at a glance

  • Usable square feet: the space you actually occupy, including your internal hallways.
  • Rentable square feet: usable square feet plus your share of common areas (the load factor, often 7% to 12%, but it varies by building and market).
  • Gross square footage: the whole building, including machinery rooms and vertical penetrations. The difference between measures can be 15% to 20%, so always ask which one is used when rates are quoted.
  • Monthly base rent = annual rate per rentable square foot × rentable square feet ÷ 12.

Ten lease questions every tenant should ask

  1. What measurement standard is used, and what is the load factor?
  2. Is the rate gross, modified gross or NNN, and what are the estimated operating costs per square foot?
  3. What is the base year or expense stop, and is there a gross-up?
  4. Are there caps on operating expense increases, and what is excluded?
  5. What concessions are offered (free rent, TI allowance), and what is the net effective rent?
  6. Who owns the building, and is there an SNDA from the lender?
  7. What renewal, expansion, termination and sublease rights do I have, and by what dates must I act?
  8. What will I owe at the end (restoration, holdover, surrender)?
  9. Who is paying the brokers, and does my representative work only for me?
  10. Who guarantees the lease, and can the guaranty be limited?

Terms A to Z

A

Abatement (Rent Abatement)

A period during which the tenant pays reduced rent or no rent, usually at the start of the term. Also called free rent. Abatement may cover base rent only, so operating expenses, utilities and parking may still be due.

Tenant tip: Check whether the abatement covers base rent only or all charges, and whether it is lost if you default.

See also: Concession

Absolute Net Lease

See Triple Net (NNN) Lease. An absolute (or bondable) net lease goes further: the tenant pays everything, including structural and roof repairs, with almost no landlord responsibility, even after fire or condemnation.

Tenant tip: Rare for multi-tenant office space. Treat it as a red flag in an office lease.

See also: Triple Net (NNN) Lease

Acceleration Clause

A provision that makes all or part of the remaining rent for the lease term immediately due if the tenant defaults.

Tenant tip: Ask that any accelerated amount be discounted to present value and reduced by rent the landlord receives from re-letting.

See also: Default; Mitigation of Damages

Additional Rent

Any charge other than base rent that the lease says the tenant must pay, such as operating expenses, taxes, insurance, utilities, parking or late fees. Often treated as rent, so non-payment can be a default.

Tenant tip: Confirm which charges are labeled additional rent and how much notice you get before they are due.

Alterations

Changes a tenant makes to the premises after move-in, as distinct from the initial build-out. Most leases require landlord consent and may require removal at lease end.

Tenant tip: Negotiate a threshold below which cosmetic changes need no consent, and a standard for consent (not to be unreasonably withheld).

See also: Restoration

Americans with Disabilities Act (ADA)

A federal law requiring accessibility in places of public accommodation and commercial facilities. Leases allocate which party pays for ADA compliance in common areas and inside the premises.

Tenant tip: Landlords often pass ADA capital costs through operating expenses. Ask who bears the cost of both common-area and in-suite compliance.

Amortization

The basis on which Tenant Improvements (TIs) are paid off over the lease term. The cost can be financed by the landlord or paid directly by the tenant. The rate is negotiable and is usually calculated with mortgage-style payment tables so the tenant pays a constant monthly amount over the term.

Tenant tip: Ask for the interest rate used and whether unamortized cost is due if you leave early.

See also: Tenant Improvements (TIs); Tenant Improvement Allowance

Anchor Tenant

A major tenant that occupies a large share of a building or center and helps draw other tenants. Anchors often receive special rights and lower rents.

Tenant tip: Check whether your lease has a co-tenancy clause if an anchor leaves.

See also: Co-Tenancy

Assignment

The transfer of the tenant's entire interest in the lease to another party. The original tenant usually remains liable unless the landlord releases it in writing.

Tenant tip: Negotiate consent that is not unreasonably withheld, and the right to assign to affiliates or a successor in a merger or sale without consent.

See also: Sublease; Change of Control

Association Fees (CAM or Owner Association Dues)

Charges levied by a property or owners association for shared services or amenities in a business park or condominium. Often passed through to tenants.

Tenant tip: Ask for the association's budget and any cap on increases.

See also: Common Area Maintenance (CAM)

Audit Rights

The tenant's right to review the landlord's books and records to verify operating expense and tax charges.

Tenant tip: Look for a reasonable window (for example, 90 to 180 days after receiving the statement), and for landlord reimbursement of audit costs if errors exceed a set percentage.

See also: Operating Expenses; Reconciliation

B

Base Building

The structure, exterior, core and mechanical systems of a building before tenant-specific work. Landlord base building work is separate from tenant improvements.

Tenant tip: Ask for a written description of base building condition, especially HVAC, restrooms, and code compliance.

Base Rent

The fixed periodic rent stated in the lease, before additional rent. It is usually quoted per rentable square foot per year and paid monthly.

Tenant tip: To get the monthly amount: annual rate x rentable square feet / 12.

See also: Gross Lease; Triple Net (NNN) Lease

Base Year

Typically the first full calendar year of actual occupancy. It is the initial period during which a tenant on a gross lease pays no pass-through (increases in operating costs over and above the base year are passed to the tenant). If the tenant leases in a new building, the base year calculation should be grossed up to 90% of building occupancy, because a high vacancy rate unfairly weighs on a tenant's percentage of shared costs. Tax increases should occur only after the year of full tax assessment, which probably will occur later than the base year.

Tenant tip: A low base year costs you more over time. Negotiate a gross-up and a base year that reflects a fully assessed building.

See also: Gross Lease; Gross-Up; Pass-Throughs

Binder / Deposit Receipt

An early payment made to hold space while a lease is negotiated. It may or may not be refundable.

Tenant tip: Get in writing whether it is refundable and credited toward first month's rent.

Block-and-Stack

A planning diagram showing which floors or areas a tenant, or several tenants, will occupy in a building. Used when evaluating whether a building can hold a company's growth.

Tenant tip: Useful for multi-floor deals and expansion planning.

Breakpoint (Expense Stop)

The level of operating expenses per square foot, set in the lease, above which the tenant begins to pay increases. Similar to a base year, but expressed as a fixed dollar amount.

Tenant tip: Compare an expense stop to the building's actual cost per square foot to see how much is already built into the rent.

See also: Base Year

Broker / Leasing Agent

An independent contractor, usually working for a large commercial brokerage firm, who represents the developer or landlord on a contingency or commission basis (no sale, no pay). The more space leased, for the longest term, at the highest rate, the higher the commission. Ask what the commission structure is, and whether the agent has exclusive representation of the project.

Tenant tip: A leasing agent works for the landlord, not you.

See also: Tenant Representative; Commission

Building Hours (Business Hours)

The hours during which the landlord provides heating, ventilation and air conditioning (HVAC), elevators and other services at no extra charge. After-hours service is typically billed.

Tenant tip: Match building hours to your operating schedule. Ask for the hourly after-hours HVAC rate.

Building Standard

Merely an indication of which level of Tenant Improvements (TIs) a landlord is willing to include as part of the TI package. It describes the finishes, doors, ceilings, lighting and similar items the landlord treats as standard.

Tenant tip: Ask for a written, itemized list. Anything above standard may be at your cost.

See also: Tenant Improvements (TIs)

Build-Out

The construction of interior improvements to make leased space ready for occupancy, according to the plans approved under the lease.

Tenant tip: Define who manages construction, who selects contractors, and the schedule and penalties for delay.

See also: Tenant Improvements (TIs); Turnkey

Business Interruption Insurance

Insurance that replaces lost income if the business is unable to operate after an insured event. Some leases require it.

Tenant tip: Ask your insurance advisor whether the required amounts suit your business.

C

Cap (Operating Expense Cap)

A limit on how much a controllable operating expense, or the total, can rise in a year. Caps may be cumulative or compounding.

Tenant tip: Some expenses (taxes, insurance, utilities, snow removal) are commonly excluded from caps. Read the exclusions closely.

See also: Controllable Expenses

Certificate of Insurance (COI)

A document from your insurer proving you carry the coverage the lease requires. Usually due before you take possession.

Tenant tip: Name the landlord and its lender as additional insureds if the lease requires it.

Certificate of Occupancy (CO)

A document from the local government confirming that a space complies with building codes and may be occupied for its intended use.

Tenant tip: Ask who is responsible for obtaining it and what happens if it is delayed.

Change of Control

A transfer of ownership interest in the tenant (for example, through a merger or sale of stock) that the lease treats as an assignment requiring landlord consent.

Tenant tip: Negotiate an exception for mergers, public offerings and transfers to affiliates.

See also: Assignment

Commencement Date

The date the lease term begins and, usually, the date rent starts to run. It may differ from the date the tenant first has access to the space.

Tenant tip: Tie it to substantial completion of landlord work, not to a fixed calendar date.

See also: Possession Date; Rent Commencement Date

Commission

Typically a percentage of the gross NNN lease value over a fixed period especially for industrial space. For example, on a 10-year lease, 4% to 5% of the value of the first 5 years and 2% to 2.5% of the next 5 years. More recently office space commissions are calculated not as a percentage, but as a flat rate per square foot leased/annum (anywhere from $1.00-$3.00/sf/annum). Leasing agents will typically share the commission with an outside broker or tenant representative, anywhere from a 50/50 split up to a full commission. Rates vary by market and are negotiable.

Tenant tip: If you are considering several buildings, make certain your agent discloses the commission rates for each property. The rates payable to brokers can differ significantly.

See also: Broker; Tenant Representative

Common Area

Parts of a building or property shared by all tenants, such as lobbies, corridors, restrooms on multitenant floors, parking areas and landscaping.

Tenant tip: Ask what is included in common areas, since their cost flows into operating expenses.

See also: Common Area Maintenance (CAM)

Common Area Factor (Load Factor)

The percentage added to a tenant's usable square feet to arrive at rentable square feet, to cover the tenant's share of common areas. See Rentable Square Feet.

Tenant tip: A high load factor raises your effective rate per usable foot.

See also: Rentable Square Feet; Usable Square Feet

Common Area Maintenance (CAM)

Charges for operating, repairing and maintaining common areas, billed to tenants, usually by share. CAM is most often used in retail and in net leases.

Tenant tip: Request a CAM budget and a list of what is and is not included.

See also: Operating Expenses; Pro Rata Share

Concession

Anything of value the landlord gives a tenant to close a deal, such as free rent, a TI allowance, moving costs or a reduced security deposit.

Tenant tip: Compare offers on a net effective rent basis, not only on face rate.

See also: Net Effective Rent

Condemnation

Government taking of all or part of a property under eminent domain. Leases say what happens to rent and the term if this occurs.

Tenant tip: Look for the right to terminate if a material part of the premises or parking is taken.

Consent (Landlord's Consent)

Approval the landlord must give before the tenant takes certain actions, such as alterations, subletting or signage.

Tenant tip: Add that consent will not be unreasonably withheld, conditioned or delayed, and set a deadline for the landlord to respond.

Contiguous Space

Space that adjoins your premises, either on the same floor or directly above or below. Often the subject of expansion rights.

Tenant tip: Ask for rights on contiguous space if you expect growth.

Controllable Expenses

Operating expenses the landlord can influence, such as janitorial, management and repairs, as opposed to uncontrollable costs such as taxes, insurance and utilities. Caps often apply only to controllable expenses.

Tenant tip: Ask for a clear list of which costs fall in each category.

Co-Tenancy Clause

A provision, common in retail, that lets a tenant reduce rent or terminate if a named anchor or a specified percentage of the center is not occupied.

Tenant tip: Specify the trigger, the remedy and the deadline for the landlord to cure.

D

Date of Delivery

See Possession Date.

See also: Possession Date

Default

A breach of the lease, such as failing to pay rent or to follow a lease covenant. The lease sets notice and cure periods and the landlord's remedies.

Tenant tip: Negotiate written notice and a reasonable cure period (for example, 5 to 10 days for monetary defaults and 30 days for others).

Demising Wall

A wall that separates one tenant's premises from another's or from common areas.

Tenant tip: Clarify who pays for building demising walls when you lease part of a floor.

Developer

Responsible for initiating and coordinating all the activities necessary for project development, including design, financing, site acquisition, preparation, permitting and lease-up. The developer's ownership role might be anywhere from 0 to 100%. More developers are turning to fee development with little or no equity investment.

Tenant tip: Ask who actually owns the building and who will make decisions about your lease.

See also: Owner; Lender

Direct Lease

A lease made directly between the landlord and the tenant, rather than a sublease.

See also: Sublease

E

Early Termination Option

A right in the lease allowing the tenant (or sometimes the landlord) to end the lease before the expiration date, usually on notice and payment of a fee.

Tenant tip: Understand the fee, the notice period and whether unamortized TI and commission costs must be repaid.

See also: Termination Fee

Effective Rent

See Net Effective Rent.

See also: Net Effective Rent

Escalation (Rent Escalation)

A scheduled or formula-based increase in rent over the term. It may be a fixed percentage or dollar amount per year, or tied to an index such as the Consumer Price Index (CPI).

Tenant tip: Compare fixed steps with CPI-based increases and look for caps on CPI increases.

See also: Base Rent

Estoppel Certificate

A signed statement by the tenant confirming that the lease is in effect, the rent and term, and whether any defaults exist. Required by buyers and lenders of the property.

Tenant tip: Set a time limit (for example, 10 to 15 days) to sign and read it carefully, because you will be held to its statements.

Exclusive Use

A clause limiting the landlord from leasing other space in the property to competitors, or to certain uses.

Tenant tip: Common in retail. Define the use narrowly and state the remedy.

Expansion Option

A right to lease additional space on agreed terms. See Option.

See also: Option; Right of First Offer; Right of First Refusal

Expense Stop

See Breakpoint.

See also: Breakpoint

F

Fair Market Rent (Fair Market Value)

The rent a willing tenant would pay and a willing landlord would accept for comparable space. Used to set rent when a lease is renewed or an option is exercised.

Tenant tip: Define how fair market rent is determined (such as appraisers or brokers) and whether concessions are included in the comparison.

Force Majeure

Events outside a party's control, such as natural disasters, strikes or government actions, that excuse or delay performance.

Tenant tip: Check that it does not excuse your obligation to pay rent, or, if it does, that it is mutual.

Free Rent

See Abatement.

See also: Abatement

Full Service Lease

See Gross Lease.

See also: Gross Lease

Furniture, Fixtures and Equipment (FF&E)

Movable items and installations a tenant provides for its own use, as distinct from building improvements.

Tenant tip: Clarify which items you can remove at lease end.

G

Gross Lease

A lease in which the rent includes an agreed level of operating costs. A rate quoted as 'gross' includes all operating costs, such as heating, ventilation and air conditioning (HVAC), taxes, insurance, janitorial services and maintenance charges. In practice, most gross leases pass through increases over a base year. Charges typically add from $4.00 to $6.00 per square foot to rental fees, depending on the type, location and age of the building.

Tenant tip: The operating cost figure is a rough guide only. Ask the landlord for actual figures. Brokers often prefer a gross lease because commissions are higher when calculated on a percentage basis.

See also: Modified Gross Lease; Triple Net (NNN) Lease; Rates

Gross Square Footage

The total square footage of the building, including machinery rooms and vertical penetrations. Most landlords quote on a rentable basis, but some do quote on a useable basis, especially when the tenant is renting an entire floor or a whole building. Be aware of the difference, as it can be as much as 15 to 20%.

Tenant tip: Always ask which measure is used and ask for the measurement standard.

See also: Rentable Square Feet; Usable Square Feet

Gross-Up

An adjustment that increases variable operating expenses to the amount that would be incurred if the building were at a stated occupancy level (often 90% to 100%). This prevents tenants from being charged more than their fair share when a building is partly vacant.

Tenant tip: Make sure the lease contains a gross-up clause that applies to the base year and later years.

See also: Base Year

Guaranty

A written promise by an individual or company, often an owner or parent company, to pay the tenant's obligations if the tenant fails to do so.

Tenant tip: Seek to limit a guaranty by amount, time or a burn-off after good payment history.

H

Hold Over (Holdover)

Staying in the premises after the lease expires. Most leases charge a penalty rent, often 125% to 200% of the last rent, and may make the tenant liable for the landlord's losses from a delayed new tenant.

Tenant tip: Try to limit the holdover rent to 125% to 150% for the first 60 days and exclude consequential damages.

See also: Tenancy at Sufferance

HVAC

Heating, ventilation and air conditioning. Leases define the hours of service, who maintains the equipment and who pays for after-hours use and supplemental units.

Tenant tip: Ask for the specifications (for example, temperature ranges) the landlord must meet.

See also: Building Hours

I

Indemnity

A promise by one party to compensate the other for certain losses or claims. Leases commonly include an indemnity by the tenant and, ideally, a mutual one by the landlord.

Tenant tip: Ask that indemnities be mutual and that each party is responsible for its own negligence.

Interest Rate on Late Payments

The rate charged on rent or other amounts paid late. It is often combined with a late fee.

Tenant tip: Ask for a grace period (for example, 5 days) for the first late payment each year.

J

Janitorial Services

Cleaning of the premises and common areas. Cost may be included in rent or charged separately.

Tenant tip: Confirm the frequency and specifications of cleaning in the lease.

L

Landlord

The owner of the property, or the owner's representative, who leases space to the tenant. The landlord is also called the lessor.

Tenant tip: Confirm the legal name of the landlord entity and who has authority to sign.

Landlord Work

Improvements the landlord agrees to complete for the tenant before the tenant moves in, usually described in an exhibit.

Tenant tip: Attach a detailed work letter and set a deadline for completion.

Late Fee

A one-time charge added when rent is not paid by a certain date after it is due.

Tenant tip: Check the amount and grace period.

Lease Abstract

A short summary of the key business terms of a lease, such as rent, term, options and deadlines. Useful for tracking critical dates.

Tenant tip: Prepare one as soon as you sign. Include notice deadlines for renewal and termination options.

Lease Commencement Date

See Commencement Date.

See also: Commencement Date

Lease Expiration Date

The last day of the lease term, unless it is extended or ended early.

Tenant tip: Calendar the notice date for any renewal option several months earlier.

Leasehold Improvements

Improvements made to leased premises for a specific tenant. They typically become the landlord's property at lease end unless the lease says otherwise.

Tenant tip: See Tenant Improvements.

Lease Term

Can be anything from one month to 20 years. Month-to-month leases are also common. Office leases are commonly 3 to 10 years.

Tenant tip: Match the term to your growth plans and add renewal options for flexibility.

See also: Option

Lender

Will, to a great extent, dictate the terms and conditions of any significant deals that a developer or developer's agent might negotiate. Preconditions for real estate lending can be strict. To finance a building, the sum of the percent of 'real' money (equity), plus the percent of pre-leasing commitments by 'bankable' tenants, must typically meet the lender's requirements (the original guidance cited at least 100%, for example 20% equity and 80% pre-lease).

Tenant tip: Your lease will often require lender approval and a subordination agreement.

See also: SNDA

Lessee

The tenant under a lease.

See also: Tenant

Lessor

The landlord under a lease.

See also: Landlord

Letter of Credit

A bank guarantee used instead of a cash security deposit. The landlord can draw on it if the tenant defaults.

Tenant tip: Ask for a burn-down schedule that reduces the amount over time.

Letter of Intent (LOI)

A non-binding document outlining the main business terms of a proposed lease. It usually precedes a formal lease and is an important negotiation tool.

Tenant tip: Be explicit that it is non-binding (except for any confidentiality or exclusivity provisions) and complete in business terms.

Load Factor

See Common Area Factor and Rentable Square Feet.

See also: Rentable Square Feet

M

Master Lease

A primary lease under which the tenant (the master lessee) subleases to others. Also, the lease between a landlord and a tenant who in turn sublets.

Tenant tip: Know the master lease terms if you are a subtenant.

Mitigation of Damages

The duty of a landlord to make reasonable efforts to re-let space after a tenant defaults, reducing the tenant's liability. The extent of this duty depends on state law and the lease.

Tenant tip: Ask for express language requiring mitigation.

Modified Gross Lease

A lease in which the tenant pays base rent and some operating costs, such as utilities or janitorial services, directly. It sits between full-service gross and triple net.

Tenant tip: Be certain it is clearly spelled out which expenses each party pays.

See also: Gross Lease; Triple Net (NNN) Lease

Month-to-Month Tenancy

A tenancy with no fixed end date that renews each month until either party gives notice.

Tenant tip: Notice periods are set by the lease or state law.

N

Net Effective Rent

The average rent over the term after taking into account concessions such as free rent, TI allowance and commissions. Used to compare offers.

Tenant tip: A higher face rate can produce a lower net effective rent. Ask for calculations.

See also: Concession

Net Lease

A lease in which the tenant pays base rent plus some or all property expenses. Variations include single net (N), double net (NN) and triple net (NNN). Some leases are 'net', or include partial payment of operating costs. Be certain that it is clearly spelled out.

See also: Triple Net (NNN) Lease

Non-Compete (Radius Restriction)

A clause that restricts a tenant (usually in retail) from operating a similar business within a defined distance.

Tenant tip: Check for it in retail leases and try to narrow it.

Non-Disturbance Agreement

See SNDA.

See also: SNDA

Notice

The required form and method for sending formal communications under a lease, such as renewal or default notices. The lease specifies addresses and methods.

Tenant tip: Keep notice addresses current and follow the lease strictly, because a missed deadline can lose valuable rights.

O

Operating Expenses (OpEx)

The costs of running a building, such as utilities, janitorial, repairs, management fees, insurance, property taxes and landscaping, that the landlord may recover from tenants.

Tenant tip: Review the lease definition and exclusions. Capital expenditures, leasing costs, landlord's debt service and the landlord's own penalties are typically excluded.

See also: Pass-Throughs; Reconciliation

Option

To extend the lease and/or to lease additional space. Gives the tenant the right to extend the lease period or expand space at his or her call at a certain point in time. May include pre-arranged lease rates, or be negotiable at the time the option is used.

Tenant tip: Options are valuable only if the terms are clear. Note deadlines and notice requirements.

See also: Renewal Option; Expansion Option

Owner

If not the developer, ask who it is.

Tenant tip: Confirm the owner's identity and whether the person signing has authority.

See also: Developer

P

Parking Ratio

The number of parking spaces per 1,000 rentable square feet. For example, a ratio of 3/1,000 means three spaces for every 1,000 rentable square feet leased.

Tenant tip: Confirm whether spaces are reserved, free or charged, and whether rates can increase.

Pass-Throughs

It is normal on a gross lease for the landlord to pass through to the tenant annual increases in operating costs. This does not apply on a triple net (NNN) lease, because the tenant is buying all such expenses directly.

Tenant tip: Know which costs are passed through and how they are calculated.

See also: Base Year; Operating Expenses

Percentage Rent

Rent based on a portion of a tenant's gross sales, paid in addition to or instead of base rent. Mostly retail.

Tenant tip: Define 'gross sales' and any exclusions carefully.

Permitted Use

The only use of the premises allowed under the lease.

Tenant tip: Make sure it is broad enough to cover your current and future business activities.

Personal Guaranty

A guaranty given by an individual, such as the owner of the tenant business, making that person personally liable for lease obligations.

Tenant tip: Try to cap it or have it end after a period of timely payment.

See also: Guaranty

Pocket-Space

Built-in expansion space which is typically only paid for when actually first used. The space may be used at any time after occupancy, but must be used by a certain date specified in the lease.

Tenant tip: A useful way to plan for growth without paying for space you do not yet need.

See also: Expansion Option

Possession Date

The date the landlord delivers the premises to the tenant to begin work or move in.

Tenant tip: Ask for a remedy, such as rent credits or the right to terminate, if delivery is late.

See also: Commencement Date

Premises

The specific space the tenant leases, described in the lease and usually shown on a floor plan.

Tenant tip: Make sure the floor plan and square footage in the lease match what was shown.

Property Manager

Most developers do their own property management. Property managers are responsible for the care and upkeep of the premises, and often coordinate leasing activities either directly or through the designated leasing agent.

Tenant tip: They are your day-to-day contact for repairs, billing and building rules.

Property Taxes (Real Estate Taxes)

Taxes levied on the property by local government. They are usually passed through to tenants, either in a base year structure or directly in an NNN lease.

Tenant tip: Ask whether the landlord will contest unfair assessments and whether tax increases from a sale of the building are passed through.

Pro Rata Share

The tenant's proportionate share of building costs, usually the tenant's rentable square feet divided by the building's total rentable square feet, expressed as a percentage.

Tenant tip: Check the denominator. A landlord who uses a smaller building size or excludes vacant space increases your share.

Punch-List Items

Finishing details which need to be fixed before the tenant 'signs off' on build-out. Moldings, nonfunctioning electrical sockets and paint flaws are examples of punch-list items.

Tenant tip: Walk the space with the contractor and landlord, and put the list in writing with deadlines for completion.

Q

Quiet Enjoyment

The tenant's right to use the premises without interference by the landlord, as long as the tenant meets its obligations.

Tenant tip: Standard in leases. Confirm that it is included.

R

Rates: Gross vs. NNN

A rate quoted as 'gross' includes all operating costs, such as heating, ventilation and air conditioning (HVAC), taxes, insurance, janitorial services and maintenance charges. A triple net, or 'NNN', rate includes none of these operating costs; all are paid directly by the tenant. NNN rates look lower, so convert quotes to the same basis before comparing.

Tenant tip: To compare, add the estimated operating costs per square foot to the NNN rate.

See also: Gross Lease; Triple Net (NNN) Lease

Reconciliation

The annual process of comparing estimated operating expense payments with actual costs. The tenant either gets a credit or owes a balance.

Tenant tip: Ask for a detailed statement and your audit rights.

See also: Audit Rights

Relocation Clause

A provision letting the landlord move the tenant to different space in the building.

Tenant tip: Seek to delete it. If it stays, ask for the landlord to pay all moving, build-out and downtime costs and limit the number of times it can be used.

Renewal Option

A right to extend the lease for a stated period, usually on notice and at a stated rent, such as fair market rent or a fixed amount.

Tenant tip: Know how rent is set and the exact deadline. Missing it can end the option.

See also: Option

Rentable Square Feet

The usable square feet, plus a percentage (typically, 7% to 12%, depending on the age, type and size of a building) of such common areas as the building lobby, common hallways and rest rooms. The percentage (also called a load factor) should not include elevator shafts, stairwells or other 'vertical penetrations'. Many markets use the BOMA measurement standards.

Tenant tip: Ask for the measurement standard and a floor plan with calculations. Re-measuring can reduce rent.

See also: Usable Square Feet; Load Factor

Rent Commencement Date

The date the tenant begins paying rent. It can be later than the commencement date because of free rent periods.

See also: Abatement; Commencement Date

Restoration

The tenant's obligation to return the premises to its original condition, or remove alterations and cabling, at lease end.

Tenant tip: Ask that the landlord state in advance which alterations must be removed.

See also: Alterations

Right of First Offer (ROFO)

Landlord will offer space to existing tenants before offering it to other potential tenants.

Tenant tip: Set a deadline for your response and define how the price will be determined.

See also: Right of First Refusal

Right of First Refusal (ROFR)

Landlord will offer space to existing tenants on the same terms and conditions included in a bonafide offer for the space.

Tenant tip: A ROFR is generally stronger than a ROFO, because you can match actual offers from third parties.

See also: Right of First Offer

S

Security Deposit

Money, or a letter of credit, held by the landlord to cover unpaid rent or damage. It is usually returned at lease end, less any deductions.

Tenant tip: Ask for the deposit to be returned within a specific number of days, and for it to be reduced over time.

See also: Letter of Credit

Self-Help

A right allowing one party to fix a problem and charge the other if it fails to do so.

Tenant tip: Seek a tenant self-help right for landlord failures that affect your business.

Services

The landlord's obligations, such as utilities, elevator service, janitorial and security. Leases specify what is included and when.

Tenant tip: Look for rent abatement if essential services are interrupted for several days.

Shell Space (Cold Shell, Warm Shell)

Space delivered with minimal finishes. A 'cold shell' lacks most systems; a 'warm shell' has basic mechanical, electrical and restrooms.

Tenant tip: Obtain a written description of what is in place at delivery.

See also: Slab-to-Slab

Signage

Signs on the building, monument or suite entry. Rights are set by the lease and local law.

Tenant tip: Negotiate rights to building directory, door and exterior signage as needed.

Slab-to-Slab

A base for tenant improvements in which the landlord provides none of the improvements. See Tenant Improvements (TIs).

See also: Tenant Improvements (TIs); Under Ceiling

SNDA (Subordination, Non-Disturbance and Attornment)

An agreement among tenant, landlord and the landlord's lender. The tenant agrees its lease is subordinate to the loan, and the lender agrees not to disturb the tenant's possession if the lender forecloses, so long as the tenant is not in default. The tenant agrees to recognize the lender or buyer as landlord.

Tenant tip: Without non-disturbance, a foreclosure could end your lease. Request it from the landlord's lender.

See also: Lender

Sole Discretion

A standard under which a party can approve or reject something for any reason. It favors the party holding it.

Tenant tip: Ask that consent standards be 'reasonable' rather than 'sole discretion'.

Space Plan

A drawing showing how a tenant will arrange walls, rooms, furniture and equipment in leased space.

Tenant tip: Have your space plan tested by an architect before you sign, so you know the space works.

Sublease

A lease of all or part of the premises by the tenant to a third party. The original tenant stays liable to the landlord.

Tenant tip: Ask for the right to sublet with reasonable consent, and for sharing of profits to be limited.

See also: Assignment

Subordination

An agreement that a lease is lower in priority than a mortgage or other interest in the property.

See also: SNDA

Substantial Completion

The point at which landlord work is sufficiently complete for the tenant to use the premises, even though minor punch-list items may remain.

Tenant tip: This often triggers the commencement date. Define it objectively.

See also: Punch-List Items

Surrender

Returning the premises to the landlord at the end of the lease, in the condition the lease requires.

Tenant tip: Document the condition at move-out with photographs.

T

Tenancy at Sufferance

Remaining in space after the lease ends without the landlord's permission.

See also: Hold Over

Tenant

The party who leases space under the lease (also called the lessee).

See also: Landlord

Tenant Improvement Allowance (TIA)

A dollar amount per square foot the landlord contributes toward the tenant's build-out. Costs beyond the allowance are the tenant's responsibility.

Tenant tip: Ask whether unused allowance can be applied to rent, moving or furniture and whether there is a deadline to use it.

See also: Tenant Improvements (TIs)

Tenant Improvements (TIs)

First, determine what improvements the landlord will include with the space. There are two general bases: one, 'under ceiling,' includes walls taped and ready for paint, HVAC system ready for specific distribution to offices, ceiling grid in place with lights and tile on the floor ready for placement, electric and plumbing stubbed off to the space and, often, window coverings. The second base is called 'slab-toslab', and includes none of these improvements.

Tenant tip: Get a written work letter and compare the value of the improvements offered across buildings.

See also: Building Standard; Slab-to-Slab; Tenant Improvement Allowance

Tenant Representative

Specializes in real estate planning and negotiating for tenants. The tenant representatives' company should not also be leasing agents (i.e., landlord representatives). Reimbursement can be a flat fee, or, if licensed by the state, the representative can share in the development's commission structure. Their reimbursement should not, however, be based solely on the size or value of the deal. The tenant representative works for the tenant, and should provide the tenant the best possible counsel, even if that means discouraging the tenant from doing a particular deal.

Tenant tip: Ask a prospective representative to put in writing who pays them and how, and whether they represent any landlords.

See also: Broker; Commission

Termination Fee

A payment required to exercise an early termination right. Often reflects unamortized brokerage fees, TIs and free rent.

Tenant tip: Ask for the amount to be fixed in advance.

Term Sheet

See Letter of Intent.

See also: Letter of Intent (LOI)

Triple Net (NNN) Lease

A lease in which the tenant pays base rent plus its share of property taxes, insurance and common area maintenance (and often all operating costs). A triple net lease includes none of these operating costs in the rent; all are paid for directly by the tenant.

Tenant tip: Ask for a three-year history of NNN expenses and an estimate.

See also: Gross Lease; Net Lease

Turnkey

Space delivered with improvements complete and ready for move-in, with the landlord managing the build-out.

Tenant tip: Ensure the specifications are described in the lease.

U

Under Ceiling

A base of tenant improvements that includes walls taped and ready for paint, HVAC system ready for specific distribution to offices, a ceiling grid in place with lights and tile on the floor ready for placement, electric and plumbing stubbed off to the space and, often, window coverings.

See also: Tenant Improvements (TIs); Slab-to-Slab

Usable Square Feet

The space actually occupied by a tenant, including his internal hallways and elevator lobbies.

Tenant tip: Multiply by the load factor to get rentable square feet.

See also: Rentable Square Feet

Utilities

Services such as electricity, gas, water, sewer, telephone and internet. The lease says whether they are included in rent, separately metered or allocated.

Tenant tip: If electricity is not separately metered, ask how it is allocated.

V

Vertical Penetrations

Openings through floors for elevators, stairs, shafts and ducts. Normally excluded when computing a tenant's rentable area.

See also: Rentable Square Feet

W

Waiver of Subrogation

An agreement that each party's insurer will not seek recovery from the other for losses covered by insurance.

Tenant tip: Typically required by landlords and often sensible for both parties. Confirm that your policy allows it.

Work Letter

An exhibit to the lease describing the improvements to be built, who builds them, who pays, deadlines and approval procedures.

Tenant tip: Treat it as part of the deal. Have it reviewed with the lease.

Z

Zoning

Local land use rules that determine permitted uses of a property.

Tenant tip: Ask the landlord to represent that your intended use is allowed.

Buyer’s glossary of commercial purchase and sale terminology

Office and industrial property: terms, due diligence and the professionals you need. Buying commercial property involves a contract, a short and expensive investigation window, and many specialists. References to Washington State law and Puget Sound conditions are included; other states differ, so confirm current details with your advisors.

The purchase process at a glance

StageWhat happensBuyer priorities
1. StrategyDefine use, size, budget, location, timing and whether you will occupy or lease the property to others.Engage a buyer’s broker, attorney, CPA and lender early.
2. Search and offerTour properties and review offering memoranda. Submit a letter of intent (LOI).Verify seller’s numbers. Negotiate the due diligence period, deposit and contingencies.
3. ContractSign the purchase and sale agreement (PSA). Deposit goes to escrow. Title is opened.Calendar every deadline. “Time is of the essence” clauses are strictly enforced.
4. Due diligenceOrder title, survey, environmental, geotechnical, structural, building systems, zoning, lease and financial reviews.Order long-lead items first. Approve or object to title in writing on time.
5. DecisionApprove, renegotiate or terminate before the due diligence period ends.Waive contingencies only after all reports are in. Seek price credits for defects.
6. Financing and closingAppraisal, loan documents, estoppels and SNDAs, closing statement, signing and recording.Check prorations and credits. Do a final walk-through.
7. After closingTransition management, insurance and tenant notices. Meet continuing environmental obligations if relying on liability protections.Keep all due diligence files, and calendar post-closing duties.

Who should be on your due diligence team

No single professional covers everything. The right team depends on the property. Hire licensed professionals with local experience, ask for a written scope, fee, timeline and a reliance letter naming you and your lender, and make sure the contract gives you enough time to receive their reports.

ProfessionalWhat they doKey deliverablesNotes and cautions
Real estate attorneyNegotiates LOI and PSA, reviews title, survey, leases, covenants and entity structure, and manages closing documents.Marked-up PSA, title objection letter, lease review memo, closing documents.Hire before signing the LOI. A broker’s form contract is not a substitute for legal advice.
Buyer’s brokerFinds and evaluates properties, analyzes comparables, negotiates price and terms, and coordinates the process.Market analysis, offer strategy, comparable sales and lease data.Confirm written agency (buyer representation) and how any commission is paid.
Title officer and escrow officerThe title company searches records and issues the commitment and policy. Escrow holds funds and documents and closes the sale.Title commitment with exception documents, owner’s policy with endorsements, closing statement.Review the commitment immediately. Ask about extended coverage and available endorsements. Escrow follows written instructions only.
Licensed land surveyorMaps boundaries, improvements, easements and encroachments, and certifies an ALTA/NSPS survey for title insurer and lender.ALTA/NSPS land title survey, with the Table A items you select.Order early, since weather and records can slow it. Match the survey to the title commitment exceptions.
Environmental consultantPerforms a Phase I ESA (and Phase II sampling if needed), reviews agency records, and advises on vapor, tanks and regulatory status.Phase I report following ASTM E1527-21, Phase II report, cost estimates and recommendations.Needed to qualify for federal liability protections. Seek reliance for you and your lender. Ask counsel before Phase II sampling because findings may have reporting consequences.
Environmental attorneyAdvises on liability under CERCLA and Washington’s MTCA, allocates risk in the PSA, and reviews agency letters and covenants.Risk memo, PSA environmental provisions, indemnity and access agreement terms.Particularly useful for industrial, auto-related, dry cleaner, fuel or manufacturing history.
Geotechnical engineerInvestigates soil and groundwater conditions with borings and tests, and evaluates bearing capacity, settlement, liquefaction, slopes and drainage.Geotechnical (soils) report with foundation and earthwork recommendations.Essential for sites with fill, slopes, high groundwater, or planned expansion or heavy loads. Existing buildings may have reports on file, so ask the seller.
Structural engineerEvaluates foundations, framing, floors, roofs and lateral (seismic and wind) systems, and capacity for changes or heavy loads.Structural condition report, seismic assessment (PML or similar), retrofit cost estimates.Critical for older masonry, concrete tilt-up and wood-frame buildings, and for industrial floor loads and racking.
Property condition assessor (architect or engineer)Inspects roofs, envelope, parking, and mechanical, electrical, plumbing and fire systems, and estimates repairs and reserves.Property condition assessment (often ASTM E2018) with a capital needs schedule.Lenders often require one. Use findings to negotiate price or credits.
Mechanical, electrical and fire protection engineersTest HVAC, power capacity, life safety, sprinklers and fire alarms, as needed.Capacity and condition reports, upgrade costs.Industrial buyers should verify power, ESFR sprinklers and compressed air and ventilation for the intended use.
Roofing consultantInspects roof condition and warranties, with core samples or moisture surveys where needed.Roof report and remaining life estimate.Roof replacement is often the largest near-term capital item.
Civil engineerEvaluates site utilities, grading, stormwater, access and parking.Site and drainage evaluation, development cost estimates.Stormwater rules can be costly for redevelopment.
Land use and zoning consultant or attorneyConfirms zoning, permitted uses, nonconforming status, critical areas, permits and entitlement risks.Zoning report or letter, permit history, entitlement strategy.Verify more than the broker’s description. Confirm the zoning allows your use and any planned expansion.
Biologist, wetland or arborist specialistsDelineate wetlands, streams and protected trees, and measure buffers.Delineation report, buffer maps.Needed for vacant or large sites near water or greenspace.
Hazardous materials specialistSurveys for asbestos, lead paint and other materials before renovation or demolition.Survey report, abatement cost estimate.Common in older buildings.
Accessibility (ADA) consultantReviews accessible routes, parking, entrances and restrooms.Accessibility survey with corrective cost estimates.Ask who bears cost and what tenants’ leases say.
AppraiserProvides an independent opinion of value, often engaged by the lender.Appraisal report.Your lender orders it, but you should understand the approach and comparables.
Mortgage broker or lenderProvides loan terms, requires reports and third-party reviews, and underwrites the property.Term sheet, commitment letter, loan documents.Get lender requirements into your due diligence schedule at the start.
CPA or tax advisorAdvises on entity structure, depreciation, cost segregation, 1031 exchanges and transfer tax effects.Tax structuring memo.Speak with them before the LOI and before choosing how to hold title.
Qualified intermediaryHolds proceeds in a 1031 exchange.Exchange agreement and documents.Must be engaged before closing the relinquished property.
Insurance brokerPrices property, liability, flood, earthquake and pollution coverage and reviews loss runs.Insurance quotes and binder.Check availability and cost for earthquake, flood and pollution coverage early. These can affect deal economics.
Property manager and leasing brokerReviews operations, vendor contracts, tenant relationships and market rents.Operating and management plan, rent comparables.Useful for leased and multi-tenant buildings.
Construction cost estimator or contractorEstimates renovation, retrofit or expansion costs.Budget and schedule.Gets you a price before you buy, rather than after.

Due diligence checklist

Legal and title

  • Title commitment, exception documents, vesting deed and recorded easements and covenants
  • ALTA/NSPS survey and zoning verification
  • Purchase agreement, entity documents and authority to sell
  • Pending or threatened litigation, code violations and notices
  • Condominium or association documents, if applicable

Leases and financial

  • Rent roll, all leases, amendments, side letters and guaranties
  • Tenant estoppels and SNDAs, and tenant security deposits
  • Three or more years of operating statements, general ledger, bank statements and tax bills
  • Service contracts, management agreement and employee matters (and which can be terminated at closing)
  • Outstanding tenant improvement and commission obligations
  • CAM and expense reconciliations, and audit history

Physical and environmental

  • Existing environmental, geotechnical and structural reports, as-built plans and permits
  • Property condition, roof, seismic and ADA assessments
  • Phase I ESA, and Phase II if recommended
  • Certificates of occupancy, fire inspections and elevator certificates
  • Utility capacity, bills and any pending special assessments
  • Industrial: clear height, dock doors, floor loads, power, sprinklers and truck circulation

Terms A to Z

A

Adjustments (Prorations)

Division of income and expenses between buyer and seller as of the closing date, such as rents, property taxes, utilities, service contracts and prepaid items.

Buyer tip: Ask escrow for a draft closing statement early and check the proration method (365-day year or actual days) used.

See also: Closing Statement; Proration

Agent (Buyer's Broker)

A licensed real estate broker who represents the buyer. In Washington and most states, the agency relationship (buyer, seller or dual) must be disclosed in writing.

Buyer tip: Confirm in writing who your broker represents and how the commission is paid.

See also: Dual Agency; Commission

All Appropriate Inquiries (AAI)

The federal standard for pre-purchase investigations that a buyer must perform to qualify for CERCLA liability protections.

See also: Bona Fide Prospective Purchaser (BFPP)

ALTA/NSPS Land Title Survey

A boundary survey prepared to standards jointly set by the American Land Title Association and the National Society of Professional Surveyors. It shows boundaries, improvements, easements, encroachments, access and zoning information as selected in the Table A items. Lenders and title insurers often require one to remove the standard survey exception from the title policy.

Buyer tip: Review Table A items with your surveyor and attorney. Order early because surveys can take weeks.

See also: Survey; Title Commitment

Americans with Disabilities Act (ADA) Compliance

Federal accessibility standards for commercial facilities. Buyers often have an accessibility consultant or architect assess parking, entrances, restrooms and paths of travel.

Buyer tip: Cost of correcting deficiencies can be significant. Include it in your budget or negotiate a credit.

See also: Property Condition Assessment

Appraisal

An independent estimate of a property's market value by a licensed or certified appraiser (in Washington, state-certified). Lenders require one, and it often controls how much they will lend.

Buyer tip: If the appraisal comes in below the price, review the purchase agreement's financing contingency and renegotiation options.

See also: Financing Contingency; Loan-to-Value (LTV)

Asbestos-Containing Materials (ACM) and Lead-Based Paint

Hazardous building materials often found in older buildings. Surveys identify them before renovation or demolition.

Buyer tip: Costs to abate can be a significant factor for older buildings.

As-Is

A sale in which the seller makes no promises about the property's condition and the buyer takes it in its existing state. It does not usually protect a seller from fraud or concealment, and it does not remove the buyer's need for due diligence.

Buyer tip: Buyers should treat 'as-is' as an invitation to investigate more, not less.

See also: Representations and Warranties

Assessed Value

The value placed on the property by the county assessor for property tax purposes. It may differ greatly from purchase price.

Buyer tip: A sale can prompt reassessment and higher taxes in later years. Ask your tax advisor to project future taxes.

See also: Property Taxes

Assignment of Contract

A transfer of the buyer's rights in the purchase agreement to another party, often a newly formed entity.

Buyer tip: Check whether the PSA allows assignment and under what conditions. Many require seller consent or permit transfers to affiliates.

See also: Purchase and Sale Agreement

Assignment of Leases and Rents

A document in which the borrower pledges rents to the lender as additional collateral. It is also used when a seller transfers existing leases to a buyer at closing.

Attorney, Real Estate

A lawyer who drafts and negotiates the purchase agreement, reviews title, survey and leases, and prepares closing documents. A buyer should engage one early, ideally before signing the letter of intent.

Buyer tip: See the due diligence team section at the front of this guide.

See also: Who Should Be on Your Due Diligence Team (front of this guide)

B

Back-Up Offer

An offer accepted by a seller as a second choice, which takes effect only if the first contract fails.

Basis (Cost Basis)

The buyer's investment in the property for tax purposes, including the purchase price and certain closing costs. It is used to calculate depreciation and gain on sale.

Buyer tip: Ask your CPA about allocating price between land, building and personal property.

See also: Cost Segregation

Bill of Sale

A document transferring ownership of personal property (such as equipment, furniture or supplies) that is included in the sale.

Buyer tip: List included items on a schedule.

Bona Fide Prospective Purchaser (BFPP)

A federal liability protection under CERCLA (Superfund law) for buyers of contaminated property who conduct 'all appropriate inquiries' before purchase and meet continuing obligations after closing. Using a proper Phase I ESA is a key step.

Buyer tip: Protection depends on meeting both pre-purchase and post-closing obligations. Consult an environmental attorney.

See also: All Appropriate Inquiries (AAI); CERCLA

Boundary Line Adjustment

A legal change to the boundary between adjoining parcels without creating new lots, subject to local rules.

Bridge Loan / Permanent Loan

A bridge loan is short-term financing, used while a property is repositioned. A permanent loan is a longer-term loan for stabilized property.

Broker Price Opinion (BPO)

An informal opinion of value prepared by a broker. It is not an appraisal.

Buyer tip: Use it as a screening tool only.

Brownfield

Real property whose expansion, redevelopment or reuse may be complicated by actual or perceived contamination. Special programs and liability protections may be available.

Buyer tip: Ask an environmental attorney about grants, cleanup programs and liability protection.

See also: Bona Fide Prospective Purchaser (BFPP)

Building Code Compliance

Whether the building meets the construction, fire and life safety codes in effect when built or modified. Open permits or unpermitted work can create problems.

Buyer tip: Have your inspector, architect or permit expediter check the permit history with the local jurisdiction.

See also: Certificate of Occupancy

Building Permit History

The record of permits issued for construction, alteration or occupancy of the building.

Buyer tip: Unpermitted work can lead to fines, required removal or difficulty with financing and insurance.

C

Capital Expenditures (CapEx)

Spending on major, long-life items such as roofs, parking lots, HVAC and elevators, as distinct from routine repairs. A property condition assessment estimates near-term capital needs.

Buyer tip: Compare the seller's CapEx history with the engineer's estimates when pricing the property.

See also: Replacement Reserves

Capitalization (Cap) Rate

Net operating income divided by the purchase price (or value), expressed as a percentage. Used to compare income properties. A lower cap rate means a higher price relative to income.

Buyer tip: Always check that the NOI used is verified and reflects realistic vacancy, management and reserves.

See also: Net Operating Income (NOI)

Cash-on-Cash Return

Annual pre-tax cash flow divided by the total cash invested by the buyer.

CERCLA

The Comprehensive Environmental Response, Compensation and Liability Act (Superfund), a federal law that can make current owners liable for cleanup of hazardous substances regardless of fault, subject to defenses. Washington has its own law, the Model Toxics Control Act (MTCA).

Buyer tip: Environmental liability can exceed the value of the property. Obtain advice before closing.

See also: Model Toxics Control Act (MTCA); BFPP

Certificate of Occupancy

A document from local government confirming that a building may be lawfully used for its intended purpose.

Buyer tip: Confirm that the use you intend (especially industrial or mixed uses) is permitted.

See also: Zoning

Clear Height (Industrial)

The vertical distance from floor to the lowest overhead obstruction, such as beams or sprinklers. A key measure for warehouse space.

Buyer tip: Confirm clear height by measurement, and compare it with your racking and equipment needs.

Closing

The final step at which the buyer pays and the seller delivers title, usually through escrow. Documents are signed, funds are exchanged, and the deed is recorded.

Closing Costs

Expenses of completing the sale, including title insurance, escrow fees, recording fees, excise tax, legal fees, lender fees and prorations.

Buyer tip: Ask for a closing cost estimate early. In Washington, the real estate excise tax (REET) is imposed on the seller by statute, though the contract can allocate economic responsibility.

See also: Real Estate Excise Tax (REET)

Closing Date

The date by which the sale must close. Many PSAs allow extensions upon payment of additional deposit.

Closing Statement (Settlement Statement)

The accounting of all funds and credits for each party at closing.

Buyer tip: Review it line by line before signing.

Cloud on Title

Any claim, lien or defect that may impair the owner's title.

See also: Title Commitment

Commercial Condominium

A form of ownership in which the buyer owns a defined unit and shares ownership of common areas. Common in small office and industrial buildings.

Buyer tip: Review the declaration, bylaws, budget, reserve study, assessments and any pending litigation.

See also: Condominium Documents

Common Area Maintenance (CAM)

Costs of maintaining shared areas, passed through to tenants in many leases or shared among owners in condominiums and business parks.

Comparable Sales (Comps)

Recent sales of similar properties used to estimate value.

Buyer tip: Seek comps from your broker and appraiser, adjusted for location, age, condition and lease status.

Condemnation

The government's taking of property under eminent domain.

Buyer tip: Ask whether any road widening, transit or public project affects the property.

Condominium Documents

The declaration, bylaws, rules, budget and financial statements for a condominium association.

Buyer tip: Allow your attorney time to review them. The purchase agreement may give you a right to terminate after review.

See also: Commercial Condominium

Contingency

A condition in the purchase agreement that must be satisfied, or waived, for the buyer to be bound to close. Common contingencies cover due diligence, financing, title and survey approval, and review of leases.

Buyer tip: Track each deadline and give any waiver or approval notice in the form the contract requires.

See also: Due Diligence Period

Cost Segregation Study

An engineering-based study that identifies components of a building eligible for shorter depreciation lives, potentially increasing early tax deductions.

Buyer tip: Ask your CPA whether it fits your tax position.

See also: Basis

Counteroffer

A response to an offer that changes its terms and ends the original offer.

Covenants, Conditions and Restrictions (CC&Rs)

Recorded restrictions governing use, appearance and obligations of properties within a development or business park.

Buyer tip: Review them for use restrictions and assessments that may affect your plans.

See also: Easement

D

Debt Service Coverage Ratio (DSCR)

Net operating income divided by annual debt payments. Lenders set minimums.

See also: Net Operating Income (NOI)

Deed

The document that transfers title. Types include statutory warranty deed (strongest buyer protection in Washington), bargain and sale deed and quitclaim deed (no promises).

Buyer tip: Ask what type of deed the seller will deliver and what warranties go with it.

See also: Statutory Warranty Deed; Quitclaim Deed

Deed of Trust

In Washington and several other states, the security instrument used in place of a mortgage. The borrower conveys title to a trustee as security for the loan.

Deferred Maintenance

Repairs and upkeep that have been postponed. Buyers estimate its cost and adjust offers accordingly.

Buyer tip: Property condition assessments typically list immediate repairs.

See also: Property Condition Assessment

Delivery of Possession

Transfer of physical control of the property to the buyer, usually at closing, subject to existing leases.

Deposit (Earnest Money)

Money paid by the buyer when a contract is signed and held by escrow. It is often refundable during the due diligence period and then at risk.

Buyer tip: Understand exactly when the deposit becomes non-refundable and what notice is needed.

See also: Due Diligence Period; Liquidated Damages

Design-Build

A construction delivery approach in which one entity is responsible for both design and construction.

Buyer tip: Relevant if you plan to renovate or expand soon after purchase.

Development Rights

The right to build or expand under current zoning, including permitted floor area and height.

Buyer tip: Check whether unused rights exist, or whether the building uses more than current zoning allows.

See also: Zoning; Nonconforming Use

Dock-High and Grade-Level Doors (Industrial)

Dock-high doors align with truck beds for loading. Grade-level (drive-in) doors allow vehicles or equipment to enter at floor level.

Buyer tip: Check count, size, condition, levelers and ratio to square footage.

Dual Agency

When one broker or firm represents both the buyer and the seller. It requires written disclosure and consent.

Due Diligence

The buyer's investigation of a property's legal, physical, environmental, financial and operational condition before it commits to buy.

Buyer tip: Create a checklist at contract signing with who is responsible for each item and when.

See also: Due Diligence Period

Due Diligence Period (Inspection Period, Feasibility Period)

The time after the purchase agreement is signed during which the buyer may investigate the property and terminate with return of the deposit. Typical lengths vary by deal; 30 to 60 days is common but larger or more complex properties may need more.

Buyer tip: Do not wait until the final week to order third-party reports. Some, like Phase II work and surveys, take weeks.

See also: Contingency; Deposit

E

Earnest Money

See Deposit.

See also: Deposit (Earnest Money)

Easement

A right to use another's land for a limited purpose, such as access, utilities or parking. It may benefit or burden the property.

Buyer tip: Have your attorney and surveyor map all easements and check for any that interfere with your intended use.

See also: Title Commitment

Economic Obsolescence

A loss in value caused by factors outside the property, such as changes in neighborhood or market.

Electrical Power (Industrial)

The electrical service available, described in amperes, voltage and phase.

Buyer tip: Ask utilities and an electrical engineer whether the capacity suits your equipment, and what upgrades cost.

Encroachment

An improvement that extends onto adjoining land or an easement, or an adjoining improvement that extends onto the property.

Buyer tip: A survey is the main tool for finding encroachments.

See also: Survey

Encumbrance

Any claim or restriction on title, such as a lien, easement or restriction.

See also: Title Commitment

Environmental Covenant (Restrictive Covenant)

A recorded restriction used when contamination remains on site, limiting uses such as groundwater use or residential development, or requiring maintenance of caps.

Buyer tip: Restrictions can affect financing, insurance and future resale.

Environmental Insurance (Pollution Legal Liability, PLL)

A policy that covers cleanup costs and third-party claims for pollution conditions, sometimes for known conditions and sometimes only for unknown ones.

Buyer tip: Ask an insurance broker with environmental expertise about coverage, exclusions and terms.

Environmental Site Assessment (ESA)

A study of environmental conditions of the property. See Phase I, Phase II and Phase III.

See also: Phase I Environmental Site Assessment (ESA); Phase II Environmental Site Assessment

Escrow

A neutral third party (an escrow company or attorney) that holds the deposit, documents and funds and releases them when conditions are met.

Buyer tip: Choose the escrow officer early and provide complete instructions.

ESFR Sprinklers (Industrial)

Early Suppression, Fast Response sprinkler systems designed for high-piled storage.

Buyer tip: A fire protection engineer can confirm whether the system suits your storage.

Estoppel Certificate

A statement signed by a tenant confirming key lease facts: rent, term, deposits, defaults, options and amendments. Buyers and lenders require estoppels for leased property.

Buyer tip: Compare each estoppel with the lease and rent roll. Differences may signal problems.

See also: Rent Roll

Exchange (1031 Exchange)

A tax-deferred exchange of real property held for business or investment under Section 1031 of the Internal Revenue Code. Strict identification and closing deadlines apply and a qualified intermediary is required.

Buyer tip: Involve a qualified intermediary and tax advisor before the sale or purchase closes. Missing a deadline can end the deferral.

See also: Qualified Intermediary

Excise Tax

See Real Estate Excise Tax.

See also: Real Estate Excise Tax (REET)

Exclusive Listing

An agreement giving a broker the exclusive right to sell property.

F

Feasibility Study

An analysis of whether a property can be used or developed as the buyer intends, covering zoning, utilities, soils, costs and revenue.

Fee Simple

The most complete form of ownership of real property, subject to liens, easements and legal restrictions.

See also: Leasehold Estate

Financing Contingency

A condition allowing the buyer to terminate if it cannot obtain loan approval on specified terms by a deadline.

Buyer tip: Many sellers of commercial property limit or refuse financing contingencies. Obtain lender term sheets early.

See also: Contingency

Floodplain

An area subject to flooding, mapped by FEMA. It may require flood insurance and limit development.

Buyer tip: Check flood maps, and ask your surveyor or engineer about elevation.

Floor Load and Slab Thickness (Industrial)

The weight capacity and thickness of the concrete floor, expressed as pounds per square foot or by thickness and reinforcement.

Buyer tip: A structural engineer can verify the capacity for heavy racking or machinery.

Foreclosure

The lender's legal process to sell property when a loan defaults. Purchases out of foreclosure have special risks and terms.

G

Geotechnical Engineer

A licensed engineer who investigates soil, rock and groundwater conditions through borings and testing, and recommends foundation design, grading and drainage.

Buyer tip: See the due diligence team section at the front of this guide.

See also: Geotechnical Report

Geotechnical Report (Soils Report)

A report on subsurface conditions, bearing capacity, liquefaction, settlement, slope stability, seismic site class and groundwater, with recommendations for foundations and earthwork.

Buyer tip: Particularly important in the Puget Sound region for sites with fill, steep slopes, high groundwater, or liquefaction hazard.

See also: Geotechnical Engineer

Grantor / Grantee

The grantor is the seller transferring title. The grantee is the buyer receiving title.

Ground Lease

A long-term lease of land only, on which the tenant owns or builds improvements.

H

Hazardous Materials

Substances regulated for their risk to health or environment, such as petroleum products, solvents, heavy metals, asbestos and lead.

See also: Phase I Environmental Site Assessment (ESA)

Highest and Best Use

The use that is legally permissible, physically possible, financially feasible and most productive. A principle used in appraisal.

Hold Harmless / Indemnity

A promise by one party to protect the other against specified claims or losses.

Buyer tip: Review the seller's and buyer's indemnities in the PSA, especially for environmental matters.

Hydrology / Drainage Study

An engineering analysis of stormwater flow, detention and drainage on a site.

Buyer tip: Stormwater requirements for development or redevelopment can be costly.

See also: Civil Engineer

I

Impact Fees

Charges imposed by local governments on new development to fund infrastructure.

Buyer tip: Ask whether any fees are due on a change of use or expansion.

Inspection Contingency

A condition allowing the buyer to inspect and terminate if it is not satisfied.

See also: Due Diligence Period

L

Land Use Attorney

A lawyer who advises on zoning, permits, entitlements and nonconforming status.

Lease Abstract

A summary of key lease terms prepared during due diligence for a leased property.

Buyer tip: Have the attorney or an asset manager check abstracts against lease documents and amendments.

See also: Rent Roll

Lease Audit

Review of all tenant leases, amendments, side letters and estoppels to verify rent, options, rights and obligations.

Leasehold Estate

An interest in real property held by a tenant under a lease, in contrast to fee ownership. Some commercial properties sit on ground leases.

Buyer tip: If land is leased, review the ground lease terms, rent resets, financeability and term remaining.

See also: Ground Lease; Fee Simple

Letter of Intent (LOI)

A generally non-binding outline of main terms such as price, deposit, due diligence period and closing date, usually followed by a formal purchase agreement.

Buyer tip: Specify what parts are binding, such as confidentiality and exclusivity.

See also: Purchase and Sale Agreement

Lien

A legal claim against property to secure payment of a debt, such as a mortgage, tax or mechanic's lien.

Buyer tip: Title review identifies liens that must be paid or removed at closing.

See also: Mechanic's Lien

Liquidated Damages

A pre-agreed amount, often the deposit, that the seller keeps if the buyer defaults, limiting the seller's remedy.

Buyer tip: Check whether the deposit is the seller's sole remedy.

See also: Deposit (Earnest Money)

Loan-to-Value (LTV)

The loan amount as a percentage of the property's appraised value or price, whichever is lower.

M

Marketable Title

Title free from reasonable doubt, so a reasonably prudent buyer would accept it.

Material Adverse Change (MAC)

A significant negative change that may allow a party to terminate or renegotiate.

Mechanic's Lien (Construction Lien)

A lien claimed by contractors or suppliers who have not been paid for work or materials on the property. Rules vary by state.

Buyer tip: Ask the seller to disclose recent work and require lien waivers. Title insurers may require affidavits.

See also: Lien

Model Toxics Control Act (MTCA)

Washington's cleanup law, administered by the Department of Ecology, which can hold owners liable for contamination. Ecology also keeps records of known and suspected contaminated sites.

Buyer tip: Ask your environmental consultant to review Ecology records and discuss liability protections.

See also: CERCLA

Mold and Indoor Air Quality

Moisture-related issues affecting health and building condition.

N

Net Lease Investment

A property leased to a tenant who pays base rent plus taxes, insurance and operating costs. Buyers of leased investment property underwrite income from these leases.

Buyer tip: Review each lease's expense responsibilities, since landlord obligations affect net income.

See also: Triple Net (NNN) Lease (see Tenant's Glossary)

Net Operating Income (NOI)

Income from the property after vacancy and operating expenses, but before debt service, depreciation and income taxes.

Buyer tip: Verify the seller's NOI with leases, bills and bank records.

See also: Capitalization (Cap) Rate

No-Further-Action (NFA) Letter

A determination by an environmental regulator that no further cleanup is required at the site, under defined conditions.

Buyer tip: Obtain and read the actual letter and its conditions, which may restrict use.

Nonconforming Use

A use or structure that was lawful when established but no longer meets current zoning. It may have limits on expansion or rebuilding after damage.

Buyer tip: Ask a land use attorney about rebuild rights after a casualty.

See also: Zoning

Nondisturbance Agreement (SNDA)

An agreement among tenant, landlord and lender in which the lender agrees not to disturb a tenant's possession after foreclosure.

Buyer tip: Buyers' lenders usually require SNDAs from major tenants.

O

Offering Memorandum (OM)

A marketing document prepared by the seller's broker, describing the property, tenants and financial performance.

Buyer tip: Treat it as marketing. Independently verify every material figure.

Operating Statement (Pro Forma)

A statement of income and expenses. A historical statement shows actual results. A pro forma projects future results.

Buyer tip: Obtain several years of historical operating statements, reconciled with tax returns or bank records.

Option to Purchase

The right, for a price, to buy property at a set price within a set time.

Owner-User

A buyer who purchases property to occupy part or all of it. Owner-users may qualify for special financing, such as SBA 504 or 7(a) loans, which have occupancy requirements.

Buyer tip: Talk to your lender about occupancy percentages and eligibility.

P

Parcel Number (APN)

The county assessor's identification number for a parcel of land. Used to look up taxes, legal descriptions and ownership.

Buyer tip: Confirm that all parcels included in the sale are listed in the contract.

Permitted Exceptions

Title matters (for example, certain easements and restrictions) that the buyer approves and will accept at closing.

Buyer tip: Only approve exceptions after your attorney and surveyor review them.

See also: Title Commitment

Phase I Environmental Site Assessment (ESA)

A review of a property's past and present uses and of government records, a site visit and interviews, to identify recognized environmental conditions (RECs). It involves no soil or water sampling. Phase I reports used for 'all appropriate inquiries' follow the ASTM E1527 standard (E1527-21 is the current recognized version). The report generally is valid for a limited time, and key components must be updated within 180 days before closing.

Buyer tip: Order it as soon as the contract is signed, because it often takes 2 to 4 weeks. Make sure your lender and you are named as users who may rely on it.

See also: All Appropriate Inquiries (AAI); Recognized Environmental Condition (REC)

Phase II Environmental Site Assessment

Intrusive testing, such as soil borings and groundwater sampling, to confirm whether contamination exists and to estimate its extent. It is recommended when a Phase I identifies RECs.

Buyer tip: Get seller access agreement in writing before drilling. Results may need to be reported to regulators in some cases, so discuss reporting duties with counsel first.

See also: Phase I Environmental Site Assessment (ESA)

Phase III / Remediation

Cleanup or corrective work, with planning, costs and regulatory review to address contamination.

Buyer tip: Obtain a cost estimate and a schedule before closing, and decide who is responsible.

Property Condition Assessment (PCA)

A report, usually prepared by an engineer or architect, that evaluates the building's systems and structure, notes deficiencies and estimates repair and replacement costs. Often follows ASTM E2018.

Buyer tip: Ask for a 10 to 12 year capital reserve schedule, and let your lender know if it requires specific standards.

See also: Capital Expenditures (CapEx)

Property Taxes

Annual taxes on real property, levied by the county. Rates and assessment practices vary by jurisdiction.

Buyer tip: Taxes may be reassessed after sale or improvement, and tenants may or may not reimburse them.

See also: Assessed Value

Purchase and Sale Agreement (PSA)

The binding contract between buyer and seller for the sale of the property. It covers price, deposit, due diligence rights, representations, closing conditions, remedies and many other terms.

Buyer tip: Have an attorney negotiate the PSA, which is usually harder to change than the LOI.

See also: Letter of Intent (LOI)

Q

Qualified Intermediary (QI)

An independent party that holds sale proceeds in a 1031 exchange so that the taxpayer never takes control of them.

Quitclaim Deed

A deed that transfers whatever interest the grantor has, without warranties.

Buyer tip: Not enough protection for a purchase from a seller. Use a warranty deed with title insurance.

See also: Deed

R

Real Estate Excise Tax (REET)

A Washington state and local tax on the sale of real property, imposed on the seller by statute, with graduated rates based on sale price. Rates and thresholds change, so confirm current figures with the Department of Revenue or escrow. Other states have different transfer taxes.

Buyer tip: Ask escrow to compute it early. Check whether entity transfers (sale of interests in an entity) trigger it.

Recognized Environmental Condition (REC)

The presence or likely presence of hazardous substances or petroleum products on a property due to a release, or a threat of a release. Related terms include Controlled REC (CREC) and Historical REC (HREC).

Recording

Filing a deed or other document with the county recorder to give public notice.

Recourse / Non-Recourse

A recourse loan lets the lender pursue the borrower's other assets. A non-recourse loan limits the lender to the property, with carve-outs for matters such as fraud and environmental claims.

Buyer tip: Read the carve-outs for 'bad boy' guaranties.

Rent Roll

A schedule listing each tenant, suite, square footage, rent, lease dates, deposits, options and arrears.

Buyer tip: Compare it with leases, estoppels and bank deposits.

See also: Estoppel Certificate

Replacement Reserves

Money set aside for future capital replacements. Lenders often require them.

See also: Capital Expenditures (CapEx)

Representations and Warranties (Reps)

Statements of fact made by the seller in the PSA about the property, such as ownership, leases, litigation and environmental matters. If untrue, they may give the buyer remedies.

Buyer tip: Ask how long the reps survive closing and whether the seller's liability is capped. Check who stands behind them (a shell entity may have no assets).

See also: Survival Period

Restrictive Covenant

A recorded limit on how the property may be used.

See also: Covenants, Conditions and Restrictions (CC&Rs)

Right of First Refusal / First Offer (Existing)

A right held by a tenant or neighbor to buy the property or lease additional space on specified terms, which may affect the buyer's purchase.

Buyer tip: Discover these rights early, because they can delay or block a sale.

S

Sale-Leaseback

A transaction in which the seller sells the property and leases it back from the buyer, common among owner-occupants.

Buyer tip: Set the lease terms, rent and the buyer's rights before closing.

SBA 504 / 7(a) Loan

Small Business Administration programs commonly used by owner-users to buy commercial property, with long terms and lower down payments. The details change, so confirm requirements with a lender.

Seismic Assessment (Probable Maximum Loss, PML)

A structural and seismic evaluation estimating damage a building may suffer in an earthquake, often expressed as PML or SEL percentage. Lenders and insurers may require it for older buildings, particularly unreinforced masonry and tilt-up concrete.

Buyer tip: Important in the Pacific Northwest. Costs of retrofit can be significant, and some jurisdictions have ordinances for certain building types.

See also: Structural Engineer

Setback

The minimum distance a building must be from property lines under zoning.

Shoreline Management / Critical Areas

Local and state rules limiting development near water, wetlands, steep slopes and other sensitive areas, usually with buffers.

Buyer tip: Ask a land use consultant to map critical areas and buffers on the site. They can reduce buildable area.

Special Assessment

A charge against the property for a public improvement such as a local improvement district (LID), or by an owners' association.

Buyer tip: Ask whether any are pending or planned.

Stabilized Occupancy

A level of occupancy a property is expected to maintain in normal market conditions.

Statutory Warranty Deed

A deed in which the seller promises that title is good and free of encumbrances other than those stated. Commonly used in Washington.

See also: Deed

Structural Engineer

A licensed engineer who assesses the load-bearing structure of a building: foundations, framing, slabs, roofs, seismic resistance and capacity for alterations or heavy loads.

Buyer tip: See the due diligence team section at the front of this guide.

See also: Seismic Assessment

Subdivision

The division of land into smaller lots, which requires government approval.

Subordination

Placing one interest below another in priority, as when a lease is subordinate to a mortgage.

See also: Nondisturbance Agreement (SNDA)

Survey

A map prepared by a licensed land surveyor that shows boundaries, improvements and other features of a property.

See also: ALTA/NSPS Land Title Survey

Survival Period

The time after closing during which representations and warranties remain enforceable.

T

Tenant Improvements (TIs) and Leasing Costs

Costs a landlord pays to prepare space for tenants and to pay leasing commissions. A buyer should know which unpaid TI and commission obligations exist for existing leases.

Buyer tip: Ask for a schedule of outstanding obligations, and negotiate credits at closing.

See also: Rent Roll

Termination Right

A buyer's right to cancel under the PSA, typically during the due diligence period or if a contingency fails.

Time Is of the Essence

A PSA clause stating that deadlines must be strictly met. Missing one can result in loss of rights or the deposit.

Buyer tip: Calendar every deadline.

Title Commitment (Preliminary Title Report)

A document from a title insurer listing the exceptions and requirements it will include when it issues a policy. It reveals liens, easements, covenants and other matters of record.

Buyer tip: Review all exception documents with your attorney, and object in writing within the PSA's title review period.

See also: Title Insurance; Permitted Exceptions

Title Company

A company that searches title, issues title insurance and often provides escrow services.

Title Insurance Endorsement

An amendment that adds or changes coverage in a title policy, such as for access, zoning, survey or tax parcel matters.

Buyer tip: Discuss with your title officer and attorney which are available in your state.

Title Insurance Exceptions

Matters excluded from coverage in the policy, listed in Schedule B.

See also: Title Commitment

Title Insurance (Lender's Policy)

A policy that protects the lender's lien position up to the loan amount. It does not protect the buyer.

Title Insurance (Owner's Policy)

Insurance that protects the owner against covered losses from defects in title that existed at the time of purchase, such as forged documents, undisclosed heirs, liens and errors in records. It is paid once at closing and lasts as long as the owner holds an interest.

Buyer tip: Ask for endorsements that fit your property (for example, survey, access, zoning, contiguity and environmental protection lien endorsements) and get an extended coverage policy. Policies exclude matters you create, known matters and many matters not of record.

See also: Title Commitment; Endorsement

Truck Court and Turning Radius (Industrial)

The paved area used by trucks to maneuver, and the space they need to turn.

Buyer tip: Check circulation with your own truck sizes.

Trustee's Sale

A non-judicial foreclosure sale under a deed of trust.

U

Underground Storage Tank (UST)

A buried tank used for petroleum or hazardous substances. Removal, closure and leak history matter to buyers.

Buyer tip: Check records and ask for tank closure documents.

Underwriting

The lender's or investor's analysis of the property and borrower to decide whether and on what terms to lend or invest. Buyers also underwrite their own purchase.

Use Restrictions

Limits on how property may be used under zoning, covenants, leases or exclusives.

Buyer tip: Check that existing leases do not grant exclusives that block your plans.

V

Valuation / Value

An estimate of what a property is worth, using income, sales comparison or cost approaches.

Vapor Intrusion

Movement of vapors from contaminated soil or groundwater into buildings.

Buyer tip: Ask your environmental consultant whether vapor evaluation is needed, especially near dry cleaners, gas stations and industrial uses.

Vesting

The manner in which the buyer will hold title (for example, an LLC or other entity).

Buyer tip: Ask your attorney and CPA how to structure ownership, and provide entity documents to the title company.

W

Walk-Through

A final inspection just before closing to confirm that the property's condition is as agreed.

Buyer tip: Confirm that no tenants moved out and no new damage has occurred.

Wetlands

Areas saturated by water that are regulated by federal, state and local law.

Buyer tip: A wetland delineation by a biologist may be necessary for vacant or large sites.

See also: Shoreline Management / Critical Areas

Z

Zoning

Local land use regulations that define permitted uses, density, height, parking and setbacks.

Buyer tip: Obtain a zoning verification letter and, for complex projects, a zoning report from a consultant or attorney.

See also: Nonconforming Use

Zoning Letter

A letter from the local government stating the property's zoning, and sometimes whether violations exist.

Buyer tip: Local jurisdictions may not provide detail. Ask the attorney or a zoning consultant for help.

Important notes

This glossary is an educational resource and is not legal, tax, engineering or environmental advice. Standards (such as ASTM E1527-21 and E2018), tax rates, thresholds and laws change and vary by state and city. Verify current requirements with your licensed advisors before relying on anything here. Always have a qualified real estate attorney involved to counsel you, and consider engaging an experienced tenant or buyer representative to negotiate on your behalf.

Courtesy of OfficeLease, Seattle WA, 206.624.0000.

Because your people matter, your space matters.